How to Install a Lexmark Z25 Printer

By Nichole Liandi

  • Overview

    The Lexmark Z25 is a high-quality thermal inkjet printer, well-suited for producing high-quality color images. To use the Z25, it must be installed and connected to a computer, via a USB cable.
    • Step 1

      Decide where you'll place the computer. It's best to find a spot that is not too far away from the computer, so the cable will reach easily. You'll also want a spot with access to 110-volt AC power. Ideally the spot where you locate the printer will be easy to access, in case you need to service the computer, and to keep it clean.
      How to Install a Lexmark Z25 Printer
    • Step 2

      Locate the USB port (input) on the rear of the Lexmark Z25 printer. Connect one end of your USB cable to the port.


    • Step 3

      Locate an open USB port on your computer. Connect the other end of your USB cable to this port.
    • Step 4

      Plug the printer into a power outlet and turn it on.
    • Step 5

      Turn on and log into your computer. Go to the Start menu. Select "Settings," "Control panel," and "Printers and faxes." You'll see your printer listed.
    • Skill: Easy
    • Ingredients:
    • Z25 printer
    • USB cable
    • Computer with USB output

    © High Speed Ventures 2011